Welcome to TOYZUKI'S FABRICATION
Performance products for your scale crawler!
Featured Products
Toyzuki V2. Chassis Kit
The V2 chassis kit is for the Axial scx10.2 with the new 5 gear transmission . The Toyzuki version 2 moves the motor closer to the frame than the old version 1 to free up some driveline clearance for the...
$201.99
ToyZuki 2.5 Delrin Transfercase
This transfercase is designed to go behind any of the Toyzuki motor mounts and has 44% overdrive. It has a 2.6:1 ratio to the rear axle and a 1.8:1 ratio to the front axle. The mounting bolt pattern is...
$45.99
ToyZuki V1 skid
The Toyzuki delrin skid is used in V1, V2, V2.5 kits. It can also be used in a V3, if you arent building the V3 with a wraith trans and links. The skid accepts the stock Axial transmission, the ToyZuki...
$20.99
ToyZuki V1 Cms kit
This kit mounts the servo and servo winch in the V1 chassis. The panhard mount and axle truss are designed for the Axial AX/SCX10 axles. There are multiple holes in the axle truss to mount your panhard...
$35.99
ToyZuki V1 Transfercase
The V1 transfer case was designed to go behind any of the Toyzuki motor mounts with a 2.6:1 ratio. It uses the top and bottom gears, bearings, and shafts from your stock 3 gear scx10 transmission. Removing...
$32.99
ToyZuki V3 Chassis Rails
The V3 chassis was designed to make a "Wroncho" build simple. The wraith axles, links, and transmission bolt right up with the V3 chassis and V3 delrin skid. The V3 chassis has been used in many applications...
$60.99
ToyZuki V3 Skid
The V3 skid is designed to be used with the V3 chassis. It is the same width as an scx10, but it's longer to accept the wraith transmission and links. It has mounting holes for the V1 and V2.5 transfercases...
$22.99
ToyZuki V3 CMS kit
This CMS kit is the same as the V1 CMS kit, but without the SCX10 axle truss. It mounts the steering servo and servo winch, and also provides a panhard mount for the chassis. The variety of axles used...
$25.99
ToyZuki V1 Chassis Extension 6x6
These chassis extensions are for adding another axle to the rear of a ToyZuki chassis. These are designed to match the shock hoops of a V1 chassis, but they will work on the other ToyZuki chassis as well....
$27.99
V2-v2.5 dual servo mount
This servo mount is for the v2 and v2.5 chassis. It allows you to mount the steering servo and the winch servo vertically. This is not the standard servo mount that comes in the kits.
$16.00
V2 and v2.5 replacement motor mount
Replacement motor mount. Fits v2 or v2.5 chassis.
$67.99
Shopping Basket
items 0
Price $0.00
Checkout
Popular Products
1. ToyZuki 2.5 Delrin Transfercase2. ToyZuki VS410 Motor Mount3. ToyZuki V1 skid4. ToyZuki SCX10 MOTOR MOUNT5. ToyZuki V1 Transfercase6. ToyZuki V1 Motor Mount